A kit of research peptides can sit in a freezer for months and serve several experiments. When a result looks off, the first question is which material went into that run. If the answer depends on someone's memory, it is already lost. A basic inventory and lot log answers the question in a minute.

This guide shows how to set one up for kit-based peptide stock. A spreadsheet is enough. If your institution runs a lab information system, the same fields apply.

Why lot-level records matter

Every Peptide Kits SKU ships as ten vials from a single lot, and each lot is tested for purity and identity before it is stocked. Lot-to-lot variation is small but real. Tying each experiment to a lot lets you:

  • Compare runs that used the same material against runs that didn't.
  • Trace a deviation back to a specific lot and its test results.
  • Ask for the same lot when you reorder for an ongoing study.
  • Show reviewers or collaborators exactly what material you used.

The fields to record

Create one row per kit when it arrives. These fields cover most labs:

FieldExampleWhy it matters
Internal IDPK-2026-014One short ID to write on boxes and notebooks.
SKUAs printed on the kitFixes compound and strength without ambiguity.
Compound and strengthAs printed on the labelReadable at a glance.
Lot numberAs printed on the vialsThe link to test results and to reorders.
Vials received10The starting count for audits.
Date received2026-10-17Drives first-in, first-out use.
Received byInitialsWho checked the shipment.
Order referenceYour quote referenceNeeded for any claim or reorder.
Storage locationFreezer 2, shelf B, box 3Saves searching a crowded freezer.
Test reportFile name or linkKeeps the lot's results one click away.
StatusSealed, in use, reserved, empty, disposedShows what is available to use.
Vials remaining7Feeds reorder decisions.

Track kits and vials separately

Keep two tabs. The kit tab holds one row per kit with the fields above. The usage tab holds one row each time a vial is taken out, with:

  • Date and time
  • Internal kit ID and vial number
  • Person who took it
  • Project or experiment ID
  • What happened to it: opened, aliquoted, used up or disposed

The usage tab is what lets you answer "which lot went into experiment 42?" without opening a single notebook. Update the vials-remaining count on the kit tab from it.

Labels that match the log

Write the internal ID and the date received on the kit box. Never cover the supplier's lot number with your own label. Use labels or markers rated for freezer temperatures, since ordinary labels can peel when condensation forms.

If you divide material into smaller containers, label each one with the internal ID, lot number and date prepared. Our storage note in research notes makes the same point: if a result looks off months later, that label is what lets you trace it.

Use the oldest stock first

Pull the kit with the earliest date received unless a study needs a specific lot. When a study does need one lot throughout, mark those kits as reserved in the status column so no one else uses them. Planning a study's full quantity in a single order makes this much easier, since every kit then shares a lot.

Set reorder points

A reorder point is the vial count that should trigger a new order. Work it out per SKU:

  1. Estimate how many vials you use per week.
  2. Estimate how long a reorder takes to arrive. With Peptide Kits that is one business day for the quote reply, then shipping once payment clears. Paid orders received by 1 pm Pacific on a business day usually ship the same day, by standard or overnight service.
  3. Multiply weekly use by the number of weeks a reorder takes, then add a margin for repeats and delays.

When stock reaches that count, send a quote request. If the reorder is for a study already running, include the lot number so the reply can address lot matching.

Audit once a month

Set a recurring date to count what is in the freezer and compare it with the log.

  • Check the vial count for each kit against the vials-remaining column.
  • Look into any gap. A missing usage entry is the usual cause.
  • Confirm that every box is where the log says it is.
  • Update the status of empty kits.
  • Dispose of material you no longer need according to applicable law and your institution's safety rules, and record the date.

Keep test reports by lot

Store each lot's test report in a shared folder named by lot number, and link it from the kit row. When someone asks what purity or identity results a lot had, the answer is one click away. Our research note on reading HPLC and mass spec results explains what those reports measure.

Common gaps and how to close them

  • Vials taken without an entry. Keep the log where the freezer is, on a shared tablet or a printed sheet that someone enters weekly.
  • Several people, several formats. Agree on date format and ID format once, and lock the header row.
  • Lots mixed in one box. Keep each kit in its own box. If you must combine, separate lots with dividers and label each section.
  • Reports saved in personal inboxes. Move every test report to the shared folder on the day the shipment arrives.

Start small

A log that is kept up to date beats a detailed one that nobody fills in. Start with SKU, lot, date received, location and vials remaining. Add fields once the habit sticks. The best time to start is the next delivery: our receiving checklist ends with exactly these entries.